Written by Joseph Felsenstein and James McGill.
© Copyright 1986-2014 by Joseph Felsenstein. All rights reserved.
License terms here.
Drawtree and Drawgram are interactive tree-plotting programs that take a tree description in a file and read it, and then let you interactively make various settings and then make a plot of the tree in a file in some graphical file format, or plot the tree on a laser printer, plotter, or dot matrix printer. In most cases you can preview the resulting tree. This allows you to modify the tree until you like the result, then plot the result. Drawtree plots unrooted trees and Drawgram plots rooted cladograms and phenograms. With a plot to a file whose format is one acceptable to publishers both programs can produce fully publishable results.
These programs are descended from PLOTGRAM and PLOTREE, written by Christopher Meacham in 1984 and contributed to PHYLIP. I have incorporated his code for fonts and his plotter drivers, and in Drawtree have used some of his code for drawing unrooted trees. In both programs I have also included some plotter driver code by David Swofford, Julian Humphries and George D.F. "Buz" Wilson, to all of whom I am very grateful. Mostly, however, they consist of my own code and that of my programmers. The font files are printable-character recodings of the public-domain Hershey fonts, recoded by Christopher Meacham. The Java interface for the programs was created by Jim McGill.
This document will describe the features common to both programs. The documents for Drawtree and Drawgram describe the particular choices you can make in each of those programs. The Appendix to this documentation file contains some pieces of C code that can be inserted to make the program handle another plotting device -- the plotters by Calcomp.
To use Drawtree and Drawgram, you must have
Once you have all these pieces, the programs should be fairly self explanatory, particular if you can preview your plots so that you can discover the meaning of the different options by trying them out.
Once you have an executable version of the appropriate program (say Drawgram), and a file called (say) intree with the tree in it, and if necessary a font file (say font2 which you have copied as a file called fontfile), all you do is run the Drawgram program. It should automatically read the tree file and any font file needed, and will allow you to change the graphics device. Then it will let you see the options it has chosen, and ask you if you want to change these. Once you have modified those that you want to, you can tell it to accept those. The version of the program that has a Java interface will then allow you to preview the tree on the computer screen.
After you are done previewing the tree, the program will want to know whether you are ready to plot the tree. In the Java GUI version of the programs, you press on the Create Plot File button when you want to produce the final plot.
In the character-mode menu-driven versions of the programs, options can be changed but previewing does not occur. Plotting will occur after you close the menu by making the Y (yes) choice when you are asked whether you want to accept the plot as is. If you say no, it will once again allow you to change options, as many times as you want. If you say yes, then it will write a file called (say) plotfile. If you then copy this file to your printer or plotter, it should result in a beautifully plotted tree. You may need to change the filename to have the file format recognized by your operating system (for example, you may want to change plotfile to plotfile.ps if the file is in Postscript format).
If you don't want to print the file immediately, but want to edit the figure first, you should have chosen an output format that is readable by a draw program. Postscript format is readable by drawing programs such as Adobe Illustrator, Canvas, Freehand, and Coreldraw, and can be displayed by the Unix utilities Ghostscript and Ghostview. It can also be imported into word processors such as Microsoft Word as a figure. The PICT format was created for earlier Macintosh drawing programs such as MacDraw, and can be read by some other drawing programs and word processors. A widely-available bitmap drawing editor is GIMP (the Gnu Image Manipulation Program). On Windows systems bitmap drawing editors such as Paint can read Windows Bitmap files. We have provided output formats here for Xfig and Idraw drawing programs available on Linux or Unix systems.
Drawing programs can be used to add branch length numbers (something too hard for us to do automatically in these programs) and to make scale bars. Another use is as a way of printing out the trees, as most drawing programs are set up to print out their figures.
Having read the above, you may be ready to run the program. Below you will find more information about representation of trees in the tree file, on the different kinds of graphics devices supported by this program, and on how to recompile these programs.
The Newick Standard for representing trees in computer-readable form makes use of the correspondence between trees and nested parentheses, noticed in 1857 by the famous English mathematician Arthur Cayley. If we have this rooted tree:
A D
\ E /
\ C / /
\ ! / /
\ ! / /
B \!/ /
\ o /
\ ! /
\ ! /
\ ! /
\ ! /
\!/
o
!
!
then in the tree file it is represented by the following sequence of printable characters, starting at the beginning of the file:
(B,(A,C,E),D);
The tree ends with a semicolon. Everything after the semicolon in the input file is ignored, including any other trees. The bottommost node in the tree is an interior node, not a tip. Interior nodes are represented by a pair of matched parentheses. Between them are representations of the nodes that are immediately descended from that node, separated by commas. In the above tree, the immediate descendants are B, another interior node, and D. The other interior node is represented by a pair of parentheses, enclosing representations of its immediate descendants, A, C, and E.
Tips are represented by their names. A name can be any string of printable characters except blanks, colons, semcolons, parentheses, and square brackets. In the programs a maximum of 20 characters are allowed for names: this limit can easily be increased by recompiling the program and changing the constant declaration for "MAXNCH" in phylip.h.
Because you may want to include a blank in a name, it is assumed that an underscore character ("_") stands for a blank; any of these in a name will be converted to a blank when it is read in. Any name may also be empty: a tree like
(,(,,),);
is allowed. Trees can be multifurcating at any level (while in many of the programs multifurcations of user-defined trees are not allowed or restricted to a trifurcation at the bottommost level, these programs do make any such restriction).
Branch lengths can be incorporated into a tree by putting a real number, with or without decimal point, after a node and preceded by a colon. This represents the length of the branch immediately below that node. Thus the above tree might have lengths represented as:
(B:6.0,(A:5.0,C:3.0,E:4.0):5.0,D:11.0);
These programs will be able to make use of this information only if lengths exist for every branch, except the one at the bottom of the tree.
The tree starts on the first line of the file, and can continue to subsequent lines. It is best to proceed to a new line, if at all, immediately after a comma. Blanks can be inserted at any point except in the middle of a species name or a branch length.
The above description is of a subset of the Newick Standard. For example, interior nodes can have names in that standard, but if any are included the present programs will omit them.
To help you understand this tree representation, here are some trees in the above form:
((raccoon:19.19959,bear:6.80041):0.84600,((sea_lion:11.99700, seal:12.00300):7.52973,((monkey:100.85930,cat:47.14069):20.59201, weasel:18.87953):2.09460):3.87382,dog:25.46154);(Bovine:0.69395,(Gibbon:0.36079,(Orang:0.33636,(Gorilla:0.17147,(Chimp:0.19268, Human:0.11927):0.08386):0.06124):0.15057):0.54939,Mouse:1.21460);
(Bovine:0.69395,(Hylobates:0.36079,(Pongo:0.33636,(G._Gorilla:0.17147, (P._paniscus:0.19268,H._sapiens:0.11927):0.08386):0.06124):0.15057):0.54939, Rodent:1.21460);
();
((A,B),(C,D));
(Alpha,Beta,Gamma,Delta,,Epsilon,,,);
The Newick standard is based on a standard invented by Christopher Meacham for his programs PLOTREE and PLOTGRAM. The Newick Standard was adopted June 26, 1986 by an informal committee that met during the Society for the Study of Evolution meetings in Durham, New Hampshire and consisted of James Archie, William H.E. Day, Wayne Maddison, Christopher Meacham, F. James Rohlf, David Swofford, and myself. A web page describing it will be found at http://evolution.gs.washington.edu/phylip/newicktree.html.
When the programs run they have a menu which allows you to set (on its option P) the final plotting device, and another menu which allows you to set the type of preview screen. The choices for previewing are a subset of those available for plotting, and they can be different (the most useful combination will usually be a previewing graphics screen with a hard-copy plotter or a drawing program graphics file format).
In the Java interface the "Final plot file type" menu gives you the choices
Which plotter or printer will the tree be drawn on?
(many other brands or models are compatible with these)
type: to choose one compatible with:
L Postscript printer file format
M PICT format (for drawing programs)
J HP Laserjet PCL file format
W MS-Windows Bitmap
F FIG 2.0 drawing program format
A Idraw drawing program format
Z VRML Virtual Reality Markup Language file
P PCX file format (for drawing programs)
K TeKtronix 4010 graphics terminal
X X Bitmap format
V POVRAY 3D rendering program file
R Rayshade 3D rendering program file
H Hewlett-Packard pen plotter (HPGL file format)
D DEC ReGIS graphics (VT240 terminal)
E Epson MX-80 dot-matrix printer
C Prowriter/Imagewriter dot-matrix printer
O Okidata dot-matrix printer
B Houston Instruments plotter
U other: one you have inserted code for
Choose one:
|
Here are the choices, with some comments on each:
Postscript printer file format. This means that the program will generate a file containing Postscript commands as its plot file. This can be printed on any Postscript-compatible laser printer, and can be incorporated into Microsoft Word documents or into PDF documents. The page size is assumed to be 8.5 by 11 inches, but as plotting is within this limit A4 metric paper should work well too. This is the best quality output option. For this printer the menu options in Drawgram and Drawtree that allow you to select one of the built-in fonts will work. The programs default to Times-Roman when this plotting option is in effect. I have been able to use fonts Courier, Times-Roman, and Helvetica. The others have eluded me for some reason known only to those who really understand Postscript. The font name is written into the file, so any name that works there is possible.
PICT format (for drawing programs). This file format is read by many drawing programs (an early example was MacDraw). It has support for some fonts, though if fonts are used the species names can only be drawn horizontally or vertically, not at other angles in between. The control over line widths is a bit rough also, so that some lines at different angles may turn out to be different widths when you do not want them to be. If you are working on a Mac OS X system and have not been able to persuade it to print a Postscript file, even after adding a .ps extension to the file name, this option may be the best solution, as you could then read the file into a drawing program and then order it to print the resulting screen. The PICT file format has font support, and the default font for this plotting option is set to Times. You can also choose font attributes for the labels such as Bold, Italic, Outline, and Shadowed. PICT files can be read and supported by various drawing programs, but support for it in Adobe Photoshop has recently been dropped. It has been replaced by PDF format as the default graphics file format in Mac OS X.
HP Laserjet PCL file format. Hewlett-Packard's extremely popular line of laser printers has been emulated by many other brands of laser printer, so that for many years this format was compatible with many printers. It was also the default format for many inkjet printers. More recently almost all of these printers have support for the Postscript format, and their support for the PCL format may ultimately disappear. One limitation of the early versions of the PCL command language for these printers was that they did not have primitive operations for drawing arbitrary diagonal lines. This means that they must be treated by these programs as if they were dot matrix printers with a great many dots. This makes output files large, and output can be slow. The user will be asked to choose the dot resolution (75, 150, or 300 dots per inch). The 300 dot per inch setting should not be used if the laser printer's memory is less than 512k bytes. The quality of output is also not as good as it might be so that the Postscript file format will usually produce better results even at the same resolution. I am grateful to Kevin Nixon for inadvertently assisting me by pointing out that on Laserjets one does not have to dump the complete bitmap of a page to plot a tree.
MS-Windows Bitmap. This file format is used by most Windows drawing and paint programs, including Windows Paint which comes with the Windows operating system. It asks you to choose the height and width of the graphic image in pixels. For the moment, the image is set to be a monochrome image which can only be black or white. We hope to change that soon, but note that by pasting the image into a copy of Paint that is set to have a color image of the appropriate size, one can get a version whose color can be changed. Note also that large enough Windows Bitmap files can be used as "wallpaper" images for the background of a desktop.
FIG 2.0 drawing program format. This is the file format of the free drawing program Xfig, available for X-windows systems on Unix or Linux systems. Xfig can be downloaded from these places:
Xfig but may draw them with lines. This often makes the names look rather bumpy. We hope to change this soon.
Idraw drawing program format. Idraw is a free drawing program for X windows systems (such as Unix and Linux systems). Its interface is loosely based on MacDraw, and I find it much more useable than Xfig (almost no one else seems to agree with me). Though it was unsupported for a number of years, it has more recently been actively supported by Scott Johnston, of Vectaport, Inc. (http://www.vectaport.com). He has produced, in his ivtools package, a number of specialized versions of Idraw, and he also distributes the original Idraw as part of it. ivtools is available as a package on the Debian family of Linux distributions, as packages ivtools-bin, libiv-unidraw1, libiv1 and (for development) ivtools-dev. Thus on a Debia-family Linux system such as Ubuntu Linux, Linux Mint, SUSE, etc. you may simply need to type:
sudo apt-get install ivtools-bin sudo apt-get install libiv-unidraw1 sudo apt-get install libiv1in order to install Ivtools.
The Idraw file format that our programs produce can be read into Idraw, and also can be imported into the other Ivtools programs such as Drawtool. The file format saved from Idraw (or which can be exported from the other Ivtools programs) is Postscript, and if one does not print directly from Idraw one can simply send the file to the printer. But the format that we produce is missing some of the header information and will not work directly as a Postscript file. However if you read it into Idraw and then save it (or import it into one of the other Ivtools drawing programs such as Drawtool, and then export it) you will get a Postscript version that is fully useable.
Drawgram and Drawtree have font support in their Idraw file format options. The default font is Times-Bold but you can also enter the name of any other font that is supported by your Postscript printer. Idraw labels can be rotated to any angle. Some of these fonts are directly supported by the Idraw program. There is also a way to install new Postscript Type 1 fonts in the Ivtools programs.
Note that the Idraw drawing program from Ivtools is not related to the drawing program iDraw, which is produced by Indeeo, Inc.
VRML Virtual Reality Markup Language file. This is by far the most interesting plotting file format. VRML files describe objects in 3-dimensional space with lighting on them. A number of freely available "virtual reality browsers" or browser plugins can read VRML files. A list of available virtual reality browsers and browser plugins can be found at http://cic.nist.gov/vrml/vbdetect.html, a site that also automatically detects which VRML plugins are appropriate for your web browser. VRML plugins for your web browser or standalone browsers allow you to wander around looking at the tree from various angles, including from behind! I found VRMLView particularly easy to download -- it is distributed as an executable. It is not particulary fast and somewhat mysterious to use (try your mouse buttons). At the moment our VRML output is unsophisticated. The branches are made of tubes, with spheres at their joints. The tree is made of three-dimensional tubes but is basically flat. Names are made of connected tubes (to get this make sure you use a simple default font such as the Hershey font in file font1). This has the interesting effect that if you (virtually) move around and look at the tree from behind, the names will be backwards. VRML itself has VRML itself has been superseded by a standard called X3D (see http://www.web3d.org/), and we will be moving toward X3D support. Fortunately X3D is backwards compatible with VRML. What's next? Trees whose branches stick out in three dimensions? Animated trees whose forks rotate slowly? A video game involving combat among schools of systematists?
PCX file format (for drawing programs). A bitmap format that was formerly much used on the PC platform, this has been largely superseded by the Windows Bitmap (BMP) format, but it is still useful. This file format is simple and is read by many other programs as well. The user must choose one of three resolutions for the file, 640x480, 800x600, or 1024x768. The file is a monochrome paint file. Our PCX format is correct but is not read correctly by versions of Microsoft Paint (PBrush) that are running on systems that have loaded Word97. The version of the Paint utility provided with Windows 7 also does not support the PCX format. The free image manipulation program GIMP (Gnu Image Manipulation Program) is able to read the PCX format.
The plot devices from here on are only available in the non-Java-interface version of the programs:
Tektronix 4010 graphics terminal. The plot file will contain commands for driving the Tektronix series of graphics terminals. Other graphics terminals were compatible with the Tektronix 4010 and its immediate descendants. There are terminal emulation programs for Macintoshes that emulate Tektronix graphics. On workstations with X windows you can use one option of the "xterm" utility to create a Tektronix-compatible window. On Sun workstations there used to be a Tektronix emulator you can run called "tektool" which can be used to view the trees.
X Bitmap format. This produces an X-bitmap for the X Windows system on Unix or Linux systems, which can be displayed on X screens. You will be asked for the size of the bitmap (e.g., 16x16, or 256x256, etc.). This format cannot be printed out without further format conversion but is usable for backgrounds of windows ("wallpaper"). This can be a very bulky format if you choose a large bitmap. The bitmap is a structure that can actually be compiled into a C program (and thus built in to it), if you should have some reason for doing that.
POVRAY 3D rendering program file. This produces a file for the free ray-tracing program POVRay (Persistence of Vision Raytracer), which is available at http://www.povray.org/. It shows a tree floating above a flat landscape. The tree is flat but made out of tubes (as are the letters of the species names). It casts a realistic shadow across the landscape. lit from over the left shoulder of the viewer. You will be asked to confirm the colors of the tree branches, the species names, the background, and the bottom plane. These default to Blue, Yellow, White, and White respectively.
Rayshade 3D rendering program file. The input format for the free ray-tracing program "rayshade" which is available at http://www-graphics.stanford.edu/~cek/rayshade/rayshade.html for many kinds of systems. Rayshade takes files of this format and turns them into color scenes in "raw" raster format (also called "MTV" format after a raytracing program of that name). If you get the Netpbm package (available from http://netpbm.sourceforge.net/projects/netpbm/). and compile it on your system you can use the "mtvtoppm" and "ppmtogif" programs to convert this into the widely-used GIF raster format. (the Netpbm package will also allow you to convert into tiff, pcx and many other formats) The resultant image will show a tree floating above a landscape, rendered in a real-looking 3-dimensional scene with shadows and illumination. It is possible to use Rayshade to make two scenes that together are a stereo pair. When producing output for Rayshade you will be asked by the Drawgram or Drawtree whether you want to reset the values for the colors you want for the tree, the species names, the background, and the desired resolution.
Hewlett-Packard pen plotter (HPGL file format). This means that the program will generate a file as its plot file which uses the HPGL graphics language. Hewlett-Packard 7470, 7475, and many other plotters are compatible with this. The paper size is again assumed to be 8.5 by 11 inches (again, A4 should work well too). It is assumed that there are two pens, a finer one for drawing names, and the HPGL commands will call for switching between these. Few people have HP plotters these days, the PCL printer control language found in but recent Hewlett-Packard printers can emulate an HP plotter, as this feature is included in its PCL5 command language (but not in the PCL4 command languages of earlier Hewlett-Packard models).
DEC ReGIS graphics (VT240 terminal). The DEC ReGIS standard is used by the VT240 and VT340 series terminals by DEC (Digital Equipment Corporation). There used to be many graphics terminals that emulate the VT240 or VT340 as well. The DECTerm windows in many versions of Digital's (now Compaq's) DECWindows windowing system also did so. These days DEC ReGIS graphics is rarely seen: it is most likely to be encountered as an option in X11 Xterm windows.
Epson MX-80 dot-matrix printer. This file format is for the dot-matrix printers by Epson (starting with the MX80 and continuing on to many other models), as well as the IBM Graphics printers. The code here plots in double-density graphics mode. Many of the later models are capable of higher-density graphics but not with every dot printed. This density was chosen for reasonably wide compatibility. Many other dot-matrix printers on the market have graphics modes compatible with the Epson printers. I cannot guarantee that the plot files generated by these programs would be compatible with all of these, but they do work on Epsons. They have also worked, in our hands, on IBM Graphics Printers. There used to be many printers that claimed compatibility with these too, but I do not know whether it will work on all of them. If you have trouble with any of these you might consider trying in the epson option of procedure initplotter to put in a fprintf statement that writes to plotfile an escape sequence that changes line spacing. As dot matrix printers are rare these days, used mostly to print multipart receipts in business, I suspect this option will not get much testing.
Prowriter/Imagewriter dot-matrix printer. The trading firm C. Itoh distributed this line of dot-matrix printers, which was made by Tokyo Electric (TEC), now a subsidiary of Toshiba. It was also sold by NEC under the product number PC8023. These were 9-pin dot matrix printers. In a slightly modified form they were also the Imagewriter printer sold by Apple for their Macintosh line. The same escape codes seem to work on both machines, the Apple version being a serial interface version. They are not related to the IBM Proprinter, despite the name.
Okidata dot-matrix printer. The ML81, 82, 83 and ML181, 182, 183 line of dot-matrix printers from Okidata had their own graphics codes and those are dealt with by this option. The later Okidata ML190 series emulated IBM Graphics Printers so that you would not want to use this option for them but the option for that printer.
Houston Instruments plotter. The Houston Instruments line of plotters were also known as Bausch and Lomb plotters. The code in the programs for these has not been tested recently; I would appreciate anyone who tries it out telling me whether it works. I do not have access to such a plotter myself, and doubt most users will come across one.
Conversion from these formats to others is also possible. There is a free program NetPBM that interconverts many bitmap formats (see above under Rayshade). A more accessible option will be the free image manipulation program GIMP (Gnu Image Manipulation Program) which can read our Postscript, Windows Bitmap (.BMP), PCX, and X Bitmap formats and can write many raster and vector formats.
In the Java GUI version of Drawgram and Drawtree, the graphics capabilities of Java are used for previewing. The programs actually write a Postscript file called JavaPreview.ps, and each time the preview is displayed this is read in and displayed.
Another problem is adding labels (such as vertical scales and branch lengths) to the plots produced by this program. This may require you to use the Postcript, BMP, PICT, Idraw, Xfig, or PCX file format and use a draw or paint program to add them. GIMP and Adobe Illustrator can do this.
I would like to add more built-in fonts. The fontfiles now have recoded versions of the Hershey fonts. They are legally publicly distributable. Most other font families on the market are not public domain and I cannot afford to license them for distribution. Some people have noticed that the Hershey fonts, which are drawn by a series of straight lines, have noticeable angles in what are supposed to be curves, when they are printed on modern laser printers and looked at closely. This is less a problem than one might think since, fortunately, when scientific journals print a tree it is usually shrunk so small that these imperfections (and often the tree itself) are hard to see!
One more font that could be added from the Hershey font collection would be a Greek font. If Greek users would find that useful I could add it, but my impression is that they publish mostly in English anyway.
The C code of these programs consists of two C programs, "drawgram.c" and "drawtree.c". Each of these uses two other pieces of C code "draw.c", "draw2.c", plus a common header file, "draw.h". All of the graphics commands that are common to both programs will be found in "draw.c" and "draw2.c". The following instructions for writing your own code to drive a different kind of printer, plotter, or graphics file format, require you only to make changes in "draw.c" and "draw2.c". The two programs can then be recompiled.
If you want to write code for other printers, plotters, or vector file formats, this is not too hard. The plotter option "U" is provided as a place for you to insert your own code. Chris Meacham's system was to draw everything, including the characters in the names and all curves, by drawing a series of straight lines. Thus you need only master your plotter's commands for drawing straight lines. In function "plotrparms" you must set up the values of variables "xunitspercm" and "yunitspercm", which are the number of units in the x and y directions per centimeter, as well as variables "xsize" and "ysize" which are the size of the plotting area in centimeters in the x direction and the y direction. A variable "penchange" of a user-defined type is set to "yes" or "no" depending on whether the commands to change the pen must be issued when switching between plotting lines and drawing characters. Even though dot-matrix printers do not have pens, penchange should be set to "yes" for them. In function "plot" you must issue commands to draw a line from the current position (which is at (xnow, ynow) in the plotter's units) to the position (xabs, yabs), under the convention that the lower-left corner of the plotting area is (0.0, 0.0). In functions "initplotter" and "finishplotter" you must issue commands to initialize the plotter and to finish plotting, respectively. If the pen is to be changed an appropriate piece of code must be inserted in function "penchange". The code to print the text needs to be added to the "plottext" function.
For dot matrix printers and raster graphics matters are a bit more complex. The functions "plotrparms", "initplotter", "finishplotter" and "plot" still respectively set up the parameters for the plotter, initialize it, finish a plot, and plot one line. But now the plotting consists of drawing dots into a two-dimensional array called "stripe". Once the plot is finished this array is printed out. In most cases the array is not as tall as a full plot: instead it is a rectangular strip across it. When the program has finished drawing in ther strip, it prints it out and then moves down the plot to the next strip. For example, for Hewlett-Packard Laserjets we have defined the strip as 2550 dots wide and 20 dots deep. When the program goes to draw a line, it draws it into the strip and ignores any part of it that falls outside the strip. Thus the program does a complete plotting into the strip, then prints it, then moves down the diagram by (in this case) 20 dots, then does a complete plot into that strip, and so on.
To work with a new raster or dot matrix format, you will have to define the desired width of a strip ("strpwide"), the desired depth ("strpdeep"), and how many lines of bytes must be printed out to print a strip. Procedure "striprint" is the one that prints out a strip, and has special-case code for the different printers and file formats. For file formats, all of which print out a single row of dots at a time, the variable "strpdiv" is not used. The variable "dotmatrix" is set to "true" or "false" in function "plotrparms" according to whether or not "strpdiv" is to be used. Procedure "plotdot" sets a single dot in the array "strip" to 1 at position (xabs, yabs). The coordinates run from 1 at the top of the plot to larger numbers as we proceed down the page. Again, there is special-case code for different printers and file formats in that function. You will probably want to read the code for some of the dot matrix or file format options if you want to write code for one of them. Many of them have provision for printing only part of a line, ignoring parts of it that have no dots to print.
I would be happy to obtain the resulting code from you to consider adding it to this listing so we can cover more kinds of plotters, printers, and file formats.
These pieces of code are to be inserted in the places reserved for the "Y" plotter option. The variables necessary to run this have already been incorporated into the programs.
Calcomp's industrial-strength plotters were once a fixture of University computer centers, but are rarely found now, but just in case you need to use one, this code should work:
A global declaration needed near the front of drawtree.c:
Char cchex[16];
Code to be inserted into function plotrparms:
case 'Y':
plotter = other;
xunitspercm = 39.37;
yunitspercm = 39.37;
xsize = 25.0;
ysize = 25.0;
xposition = 12.5;
yposition = 0.0;
xoption = center;
yoption = above;
rotation = 0.0;
break;
Code to be inserted into function plot:
Declare these variables at the beginning of the function:
long n, inc, xinc, yinc, xlast, ylast, xrel, yrel, xhigh, yhigh, xlow, ylow; Char quadrant;
and insert this into the switch statement:
case other:
if (penstatus == pendown)
putc('H', plotfile);
else
putc('D', plotfile);
xrel = (long)floor(xabs + 0.5) - xnow;
yrel = (long)floor(yabs + 0.5) - ynow;
xnow = (long)floor(xabs + 0.5);
ynow = (long)floor(yabs + 0.5);
if (xrel > 0) {
if (yrel > 0)
quadrant = 'P';
else
quadrant = 'T';
} else if (yrel > 0)
quadrant = 'X';
else
quadrant = '1';
xrel = labs(xrel);
yrel = labs(yrel);
if (xrel > yrel)
n = xrel / 255 + 1;
else
n = yrel / 255 + 1;
xinc = xrel / n;
yinc = yrel / n;
xlast = xrel % n;
ylast = yrel % n;
xhigh = xinc / 16;
yhigh = yinc / 16;
xlow = xinc & 15;
ylow = yinc & 15;
for (i = 1; i <= n; i++)
fprintf(plotfile, "%c%c%c%c%c",
quadrant, cchex[xhigh - 1], cchex[xlow - 1], cchex[yhigh - 1],
cchex[ylow - 1]);
if (xlast != 0 || ylast != 0)
fprintf(plotfile, "%c%c%c%c%c",
quadrant, cchex[-1], cchex[xlast - 1], cchex[-1],
cchex[ylast - 1]);
break;
Code to be inserted into function initplotter:
case other:
cchex[-1] = 'C';
cchex[0] = 'D';
cchex[1] = 'H';
cchex[2] = 'L';
cchex[3] = 'P';
cchex[4] = 'T';
cchex[5] = 'X';
cchex[6] = '1';
cchex[7] = '5';
cchex[8] = '9';
cchex[9] = '/';
cchex[10] = '=';
cchex[11] = '#';
cchex[12] = '"';
cchex[13] = '\'';
cchex[14] = '^';
xnow = 0.0;
ynow = 0.0;
fprintf(plotfile, "CCCCCCCCCC");
break;
Code to be inserted into function finishplotter:
case other:
plot(penup, 0.0, yrange + 50.0);
break;
The Hershey fonts were digitized fonts created by Dr. A. V. Hershey in the late 1960s when he was working at the U. S. Naval Weapons Laboratory. They were published in U. S. National Bureau of Standards Special Publication No. 424, distributed by the U. S. National Technical Information Service. Legally, it is possible to freely distribute these fonts in any encoding system except the original one used by the U. S. National Technical Information Service, provided that you acknowledge that the original fonts were produced by Dr. Hershey and published by NBS. This is a somewhat odd restriction, but convenient for us. Chris Meacham developed the software we use to read the Hershey fonts, and it uses a simple coding system that he developed. The original Hershey fonts were transformed by him into this encoding system. Six of them are distributed with PHYLIP: three Roman fonts, one unserifed and two serifed, two Italic fonts, one unserifed and one serifed, and a Russian Cyrillic font.
Each font file consists of groups of lines, one for each character. Here are the lines for character "h" in the font #1 in this encoding:
Ch 608 21 19 28 -1456 1435 -1445 1748 1949 2249 2448 2545 2535 -12935 |
The group of lines starts with the letter C (for Character). Then follows the character that this font will draw (in this case "h"). It is the byte which, when read by the computer, signals that character. Then there is the number of this character in the original Hershey fonts (608). This is not used by our software.
The Hershey fonts are drawn on a grid of points as a series of lines. The next three numbers (21, 19, and 28) are the height (21), and two widths (19, and 28, which we don't use). Then comes a new line which shows the individual pen moves. When these are negative, they indicate that the pen is to be up when moving; when they are positive, the pen is to be down. They are integers. The last of them is greater than 10,000, and that is the signal to end after that move.
Each number has a final four digits that give the coordinate to which the pen is to move. These are given as (x,y) coordinates. Thus the first number (-1456) indicates the pen is to be up and the plotting is to move to coordinate (14, 56), which is x = 14, y = 56. Then the pen is put down and moved to (14, 35). This draws a line from (14, 56) to (14, 35), in fact the vertical line that forms the back of the "h". Then the pen is picked up and moved to (14, 45). Then there follow a series of moves with pen down to (14, 35), (14, 45), (17, 48), (19, 49), (22, 49), (24, 48), (25, 45), and finally (25, 35). This draws a series of connected line segments that make the arch and right-hand vertical, ending up at the bottom-right of the character. -12935 then signals a pen-up move to (29, 35). This moves to a point where the next character can start, putting in a little "white space".
As you can see, the coding system is quite simple. Does anyone want to draw us some new fonts to add to our repertoire? I have spared you the Gothic, Old English, and Greek Hershey fonts, but perhaps there are some other nice ones people might want to use.